SRY2/SRY4 Immersion Tubular Electric Heater Immersion Electric Heater Manufacturer PriceFeatures:
Based on the SRY2 ordinary tubular electric heater, its wiring device and heating structure have been improved. Three heating tubes are used as a group, effectively reducing the surface load of the heater. It can directly replace the SRY2-SRY4 type heater.
This electric heater is constructed by welding bent tubular elements onto a flange. Since the heater is directly placed in oil for heating, it has high thermal efficiency and long service life.
SRY2/SRY4 Immersion Tubular Electric Heater Immersion Electric Heater Manufacturer PriceMain Technical Parameters, Specifications, Length:
Rated Voltage: Single-phase 220V, Three-phase 380V
Working Medium: Mineral oil, water, and other media with good heat dissipation
Surface Heating Power: 1KW～4KW 1.5w/cm², 5KW～8KW 2.5w/cm²
Working Pressure: 0.6Mpa
SRY2/SRY4 Immersion Tubular Electric Heater Immersion Electric Heater Manufacturer PriceInstructions:
1) The working voltage must not exceed 1.1 times its rated value, and the shell should be effectively grounded.
2) Dimension "B" in the diagram must be fully immersed in oil (and checked regularly) to avoid burning. The heated oil should be free of corrosive gases.
3) The mounting hole size of this electric heater is φ65mm.
4) This model heater is designed according to the JB2379-78 flowing oil standard, with a surface load of 2-3.8w/cm².
5) When selecting, the heater size should be determined based on the actual dimensions of the heating medium.
Note: This heater can be directly mixed with SRY2 and SRY4 types.
Instructions:
1) The working voltage must not exceed 1.1 times its rated value, and the shell should be effectively grounded.
2) Dimension "B" in the diagram must be fully immersed in oil (and checked regularly) to avoid burning. The heated oil should be free of corrosive gases.
3) The mounting hole size of this electric heater is φ65mm.
4) This model heater is designed according to the JB2379-78 flowing oil standard, with a surface load of 2-3.8w/cm².
5) When selecting, the heater size should be determined based on the actual dimensions of the heating medium.
Note: This heater can be directly mixed with SRY2 and SRY4 types.
Main Technical Parameters, Specifications, Length:
Rated Voltage: Single-phase 220V, Three-phase 380V
Working Medium: Mineral oil, water, and other media with good heat dissipation
Surface Heating Power: 1KW～4KW 1.5w/cm², 5KW～8KW 2.5w/cm²
Working Pressure: 0.6Mpa
Features:
Based on the SRY2 ordinary tubular electric heater, its wiring device and heating structure have been improved. Three heating tubes are used as a group, effectively reducing the surface load of the heater. It can directly replace the SRY2-SRY4 type heater.
This electric heater is constructed by welding bent tubular elements onto a flange. Since the heater is directly placed in oil for heating, it has high thermal efficiency and long service life.
Instructions:
1) The working voltage must not exceed 1.1 times its rated value, and the shell should be effectively grounded.
2) Dimension "B" in the diagram must be fully immersed in oil (and checked regularly) to avoid burning. The heated oil should be free of corrosive gases.
3) The mounting hole size of this electric heater is φ65mm.
4) This model heater is designed according to the JB2379-78 flowing oil standard, with a surface load of 2-3.8w/cm².
5) When selecting, the heater size should be determined based on the actual dimensions of the heating medium.
Note: This heater can be directly mixed with SRY2 and SRY4 types.
Main Technical Parameters, Specifications, Length:
Rated Voltage: Single-phase 220V, Three-phase 380V
Working Medium: Mineral oil, water, and other media with good heat dissipation
