Meltblown Fabric Ceramic Heater
Product Structure: The ceramic heater uses stainless steel as the outer shell, with high insulation and fire-resistant ceramics inside, threaded with resistance wires, and mechanically twisted into shape. It can be used by connecting to a power source.
* Rapid heating: reaches 500°C in 30 seconds
* Thermal efficiency over 90%, 1.5 times that of PTC heaters
* Power can be customized from 50W to 2000W
* Voltage from 12V to 380V
* Shape not limited by appearance (can be customized)
* Uses honeycomb ceramic heating elements, a new foreign technology
* Resistant to water, acid, and alkali
* Heats with ceramic plates, no red glow, no combustion, rapid heating, reaches 500°C within 30 seconds.
* Below 500°C, no open flame, no oxygen consumption, no oxidation, no dry mouth or tongue, can deodorize and keep indoor air fresh.
* Thermal efficiency up to 90%, 1.5 times that of PTC heaters, 2 times that of traditional electric wire heaters, saving 30% on energy and electricity costs.
* Emits far-infrared and radiant heat with an emissivity of up to 91%.
* Does not burst when exposed to water, resistant to acid and alkali, suitable for harsh environments.
* No surge current at startup, maintains constant temperature.
* Ceramic heater suitable for: makeup, facial masks, relief of rheumatism and joint pain. Besides warming the room, it is excellent for warming cold feet and relieving pain for office workers and those with cold extremities.
* Operating voltage 12V-380V, power 50W-2000W.
Meltblown Fabric Ceramic Heater
Advantages
1. Fast heat transfer, uniform heating, stable operation.
2. No heat leakage, saves electricity, outer cover is not hot to touch, safe operation.
3. High power, using ceramic strip threading method, power is 0.5~1.5 times higher than ordinary ones.
4. European and American high-temperature resistant heating wire, with fast heat dissipation, uniform heating, high-temperature stability, can be used at 600-800°C for a long time.
5. Long service life, as raw materials age slowly at high temperatures.
6. Meets national GB technical requirements. Power deviation +5% to -10%.
7. Electrical strength: withstands 1500V/50Hz sinusoidal AC voltage test for 1 minute without breakdown.
8. High mechanical strength, good thermal insulation performance, large contact area with heated objects, long service life.
9. Easy installation and maintenance, low operating cost, even if the internal heating material is damaged, the external ceramic parts can be reused.
