News Details

Model Specification

SRY6-1

Voltage/Power

Heating Tube Surface Power

cm2

Sheath Tube Surface Power

cm2

L (mm)

L1 (mm)

380/2KW

0.8

1

1200

1120

380/4KW

1.6

1.8

1200

1120

380/6KW

2.4

2.8

1200

1120

380/8KW

2.8

3.5-inch

1370

1300

Model Specification

SRY6-2

Voltage/Power

Heating Tube Surface Power

cm2

Sheath Tube Surface Power

cm2

L (mm)

L1 (mm)

220/1KW

1.25

1.4

440

360

220/2KW

1.75

2

590

510

220/3KW

1.9

2.1

790

710

220/4KW

2

2.2

1000

920

220/5KW

2

2.3

1200

1120

220/6KW

2.4

2.8

1200

1120

220/8KW

2.8

2

1370

1300

Model Specification

SRY6-3

Voltage/Power

Heating Tube Surface Power

cm2

Sheath Tube Surface Power

cm2

L (mm)

L1 (mm)

380/1KW

1.25

1.4

440

360

380/2KW

1.75

2

590

510

380/3KW

1.9

2.1

790

710

380/4KW

2

2.2

1000

920

380/5KW

2

2.3

1200

1120

SRY6-2 (220V/2KW) Sheath Type Electric Heater Features Note the following:

To ensure correct and reliable use of the electric heater, it must be installed and used by qualified personnel, and the heater must be carefully maintained. Only when used by qualified personnel familiar with the installation, startup, use, and maintenance of similar heaters can the electric heater operate well. Operators must carefully read this instruction manual. The safety instruction manual is included in the accompanying materials of the electric heater, containing relevant safety regulations and effective electrical installation and operation content.

This electric heater is produced and tested according to the JBT2379-93 standard. The heater has a complete protective device when leaving the factory. To protect and ensure safe use of the electric heater, users must pay attention to the relevant descriptions in the instruction manual. Failure to follow the instruction manual may result in personal injury or even death, or damage to equipment and facilities connected to the electric heater. In any case, if the content designed in the instruction manual is incorrect, please contact the manufacturer at the address in the following manual. If the electric heater is obviously damaged, faulty, or improperly stored, the electric heater cannot be operated safely.

SRY6-2 (220V/2KW) Sheath Type Electric Heater Features Standards and Regulations

When used in industries other than the effective industrial standards or the JBT2379-93 standard specified in the manual, attention should be paid to the same effective standards of the relevant industry.

1.Overview

1.1  Description

It is not allowed to use this electric heater above the boiling point of the heating medium under atmospheric pressure.

1.2 SRY6-2 Electric Heater

The SRY6 electric heater is used for preheating heavy oil, lubricating oil, diesel, and similar media. The maximum working temperature of SRY6-2 is 100°C, and the maximum use temperature must not exceed 300°C. The user can increase or decrease the number of heaters according to the quantity of heating medium, heating time, and heating limit.

1.3 Since the heating tubes are arranged in a fluid-like manner, the heater can heat the heating medium very evenly. The replaceable electric heating tubes are inserted into the heater container. When replacing the heater, there is no need to drain the heated medium.

1.4If the surface load of the heater is low, it can avoid bubbles and carbonization of the heating medium.