Cast aluminum electric heater is an electric heater that uses tubular electric heating elements as the heating body and high-quality cast materials as the shell, formed by die-casting. Its operating temperature is generally between 150 and 450 degrees Celsius. It can be widely used in plastic machinery, mold heads, cable machinery, chemical, rubber, petroleum and other equipment. Cast aluminum heaters have the advantages of long life, good thermal insulation performance, strong mechanical properties, corrosion resistance, and magnetic resistance. The explosion-proof heater has explosion-proof marks such as ExdⅡBT4, ExDⅡBT6, ExdeⅡCT6, etc. Cast aluminum electric heater is a heater with high efficiency and uniform heat distribution. The metal alloy with excellent thermal conductivity ensures uniform hot surface temperature, eliminating hot spots and cold spots in the equipment. It has the advantages of long life, good thermal insulation performance, strong mechanical properties, corrosion resistance, and magnetic resistance. Adding insulation devices to the outer heat dissipation surface and sintering infrared rays on the inner heat dissipation surface can save 35% of electricity.
Cast Aluminum Electric Heater
Cast Aluminum Electric Heater is a type of electric heater.
Electric heater varieties include: cast aluminum heater, cast iron heater, quartz tube heater, stainless steel electric heating tube, 10# steel heating tube, heating tube with wound fins, VC443, VC442, VC441, VC432 induction heater, hot plate assembly, vacuum diffusion pump electric heating plate, dust-free heater, thermocouple, high-temperature wire, ceramic heating tile, resistance wire, and other specifications.
This series of heater products: resistance wires are all made of imported nickel-chromium wire and high-quality insulating materials. It has the characteristics of reasonable design, fine and precise processing, high thermal efficiency, energy saving, safety and reliability.
Usage and maintenance:
1. First, check whether the power supply voltage at the site matches the rated voltage of this product. If not, equip a power supply voltage with the same rated voltage as this product.
2. To ensure safety, remember to reliably ground the shell of the electrical equipment.
3. If the electric heater product has been stored for more than three months before use, it should be intermittently powered on for self-drying under allowable conditions, heating for ten minutes and powering off for half an hour, repeated three to four times to expel moisture inside the heating element.
4. During storage, the electric heater should be protected from moisture and corrosion, and stored in a well-ventilated place.
Instructions:
1) The working voltage must not exceed 10% of the rated value;
2) The wiring part should be placed outside the heating layer and insulation layer, and the shell should be effectively grounded;
3) It should be stored in a dry place. If the insulation resistance is lower than 1MΩ due to long-term storage, it can be baked in an oven at about 200 degrees Celsius for 5-6 hours to restore normal.
Cast aluminum heater outline drawing
3D Integrated Cast Aluminum Electric Heater
Function and Use
The 3D integrated cast aluminum heater, professionally known as the 3D MAX Integrated Rapid Heating System, is the core heating system of instant electric water heaters. It consists of an independent water flow channel three-dimensionally surrounding the heating element, integrating the surrounding water path, core planar heating, constant temperature control heat dissipation device, dry-burn protection device, and anti-scale design system, effectively solving problems such as water leakage, electric leakage, scale, dry burning, and fluctuating outlet water temperature in instant heating systems, improving efficiency and speed. Because its processing technology is the cast aluminum heating technology of integral aluminum alloy casting, it is commonly called a "cast aluminum" heater. It consists of an independent water flow channel three-dimensionally surrounding the heating element, integrating the surrounding water path, core planar heating, constant temperature control heat dissipation device, dry-burn protection device, and anti-scale design system, effectively solving problems such as water leakage, electric leakage, scale, dry burning, and fluctuating outlet water temperature in instant heating systems, improving efficiency and speed. It is an integrated heating system developed by technicians of Zhongshan Hangong Electric Appliance Co., Ltd. through years of effort, combining the advantages of various water heaters and instant heating technologies, enhancing and perfecting the heating technology of instant electric water heaters. It has gradually gained widespread attention and application, and has obtained a national utility model patent certificate.
