Cast Aluminum Heating Plate
SRY8 (380V/8KW) Finned Electric Heater, High Quality and Low PriceFeatures:

SRY8 finned electric heater consists of "metal tubular heating element" and finned protective sleeve, etc. The finned protective sleeve is made of seamless steel pipe, metal fins, and heat-resistant ≤300°C asbestos rubber sealing gasket.

The electric heater is connected and fixed to the oil tank body by flange; sealed by sealing gasket; the metal tubular heating element is isolated from the heated medium by the finned sheath-type protective sleeve. When replacing the metal tubular heating element, it is not necessary to drain the oil from the tank; only the metal tubular heating element needs to be pulled out for replacement. It is convenient, maintainable, repairable, and reliable.

SRY8 (380V/8KW) Finned Electric Heater, High Quality and Low PriceThe fins and protective sleeve are assembled parts. Changing the number of fins can change the surface load of the electric heater. Proper use can prevent oil carbonization and burning, ensuring safety, reliability, and extending medium life.

SRY8 (380V/8KW) Finned Electric Heater, High Quality and Low Price Technical Parameters:

1. Metal tubular heating element    Rated voltage                              220V, 380V

                                   Maximum allowable temperature of element metal tube       170℃-400℃

2. Heated medium              Mineral oil, water

Working pressure of finned tube sheath-type electric heater ≤0.5Mpa

Heating cylinder extending into the medium inside the tank       ≤L×Φ/kw

L:     ~460-1470 (mm)

Φ:   ~115 (mm)

Power: 2~6 (kw)

 

 

SRY8 finned electric heater consists of "metal tubular heating element" and finned protective sleeve, etc. The finned protective sleeve is made of seamless steel pipe, metal fins, and heat-resistant ≤300°C asbestos rubber sealing gasket.

The electric heater is connected and fixed to the oil tank body by flange; sealed by sealing gasket; the metal tubular heating element is isolated from the heated medium by the finned sheath-type protective sleeve. When replacing the metal tubular heating element, it is not necessary to drain the oil from the tank; only the metal tubular heating element needs to be pulled out for replacement. It is convenient, maintainable, repairable, and convenient, reliable.

Technical Parameters:

1. Metal tubular heating element    Rated voltage                              220V, 380V

                                   Maximum allowable temperature of element metal tube       170℃-400℃

2. Heated medium              Mineral oil, water

Working pressure of finned tube sheath-type electric heater ≤0.5Mpa

Heating cylinder extending into the medium inside the tank       ≤L×Φ/kw

L:     ~460-1470 (mm)

Φ:   ~115 (mm)

Power: 2~6 (k

SRY8 (HRY8, HRY9*) Finned Tube Sheath-Type Electric Heater Specifications, Technical Parameters, Main Dimensions Figure 1 and Table 1

Figure 1 and Table 1

SRY8 finned electric heater consists of "metal tubular heating element" and finned protective sleeve, etc. The finned protective sleeve is made of seamless steel pipe, metal fins, and heat-resistant ≤300°C asbestos rubber sealing gasket.

The electric heater is connected and fixed to the oil tank body by flange; sealed by sealing gasket; the metal tubular heating element is isolated from the heated medium by the finned sheath-type protective sleeve. When replacing the metal tubular heating element, it is not necessary to drain the oil from the tank; only the metal tubular heating element needs to be pulled out for replacement. It is convenient, maintainable, repairable, and reliable.