Portable HRY5 Sheathed Electric Heater 220V/6KW :
The electric heater consists of a heating core and a sheath. The heating core uses high-temperature resistant alloy electric heating wire as the heat source, high-temperature resistant ceramic as the insulation medium, and the sheath is made of cold-drawn seamless steel pipe or stainless steel.
The electric heater is connected to the oil tank body by flange. The sheath isolates the heating core from the heated oil. When replacing the electric heater, there is no need to drain the oil from the tank; just pull out the heating core and replace it with a new one, making maintenance convenient.
The electric heater has a large contact area with the heated oil, low surface power, no carbon deposition, and the oil will not carbonize due to local high temperature. Long service life, safe, reliable.
Portable HRY5 Sheathed Electric Heater 220V/6KW Product Application:
HRY sheathed electric heater is used for heating hydraulic oil in hydraulic and lubrication devices, and can also be used for heating non-corrosive gases or liquids.
Main Technical Parameters:
Rated Voltage: Single-phase 220V, Three-phase 380V
Surface Heat Dissipation: ≤3W/CM2
Operating Temperature: ≤300℃
Working Medium: Mineral Oil
Working Pressure: ≤0.8Mpa
Technical Specifications:
Model Parameter Power HRY1 HRY2 HRY3
Voltage (V) Surface Power (w/cm2) Dimensions mm Voltage (V) Surface Power (w/cm2) Dimensions mm Voltage (V) Surface Power (w/cm2) Dimensions mm
L L1 L L1 L L1
1KW 220 1.4 440 360 380 1.4 440 360
2KW 380 1.0 1200 1120 220 2.0 590 510 380 2.0 590 510
3KW 220 2.1 790 710 380 2.1 790 710
4KW 380 1.8 1120 1120 220 2.2 1000 920 380 2.2 1000 920
5KW 380 2.3 1200 1120
6KW 380 2.8 1120 1120
8KW 380 2.4 1750 1650
? After-sales Limited-time Service Commitment
1. We will provide relevant technical training and technical information according to customer requirements.
2. If there are quality issues with the product, we offer free replacement within one month, three years of free warranty, and lifelong maintenance, with contracts followed as agreed.
3. We guarantee to provide guidance within 15 minutes for you to troubleshoot simple equipment faults.
4. For instruments under 10 kg, we will resolve the fault or provide a replacement device for temporary use within two days until the damaged device is repaired.
5. For instruments over 10 kg, we will resolve the fault or provide a replacement device for temporary use within three days until the damaged device is repaired.
