Electric Heat Tracing Cable Factory Direct
Cable Structure
1. Copper core conductor: 7×0.50, 19×0.32, 19×0.41
2. Conductive plastic layer: Ordinary PTC, Flame-retardant PTC, Fluorine-containing PTC
3. Insulation layer: Modified polyolefin, Flame-retardant polyolefin, Fluorine-containing polyolefin, Perfluorinated material
4. Shielding layer: Tinned soft round copper wire, coverage density 80%
5. Sheath layer: Modified polyolefin, Flame-retardant polyolefin, Fluorine-containing polyolefin, Perfluorinated material
3. Construction temperature: Minimum: -5℃
4. Thermal stability: After 300 cycles between 15℃ and 99℃, the cable heating output remains above 90%.
5. Bending radius: 25.4mm at room temperature 20℃, 35.0mm at low temperature -30℃
6. Insulation resistance: For a cable length of 100m at ambient temperature 75℃, using a 2,500VDC megger for 1 minute, the insulation resistance (between conductor and shield) minimum is 120MΩ.
7. Starting current (10℃): 0.4A per meter
8. For installation and use, please refer to the precautions section
9. Maximum use length: not exceeding 100 meters
